Phone.: (03) 9311 7822 | sales@liquipvictoria.com.au

Categories

CM Series Coalescer Catridges

For Maximum Water Coalescing Efficiency And Solids Holding Capacity

Suitable for Category M applicaitons

Facet CM Series coalescer cartridges offer the finest performance available. This line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from aviation fuel.

The Facet coalescer separator housings equipped with CM Series coalescer and companion separator cartridges have been tested and fully qualified to EI 1581, 6th Edition, for category "M", in both vertical and horizontal orientations.

Built for balanced fluid flow-thru and structural strength, each CM Series coalescer cartridge is a single piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a coated, perforated metal center tube- all encased in an outer sock material. All are 6" OD (152 mm) by 3½" ID (89 mm) and available in standard interchangeable nominal lengths in increments from 11¼" (290 mm) to 57¼" (1450 mm).

The CM Series 6 colaescer cartridges are available in two cartridge mounting styles; self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance -uniform threads, no shrinkage, no galling and no gasket to recover.

A permanently affixed Buna gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.

  • Qualified to the 6th Edition of EI 1581 for all category “M”.
  • Multi-layered media for increased solids holding capacity .
  • Ultra-fine solids removal.
  • Maximum water coalescence.
  • Balanced cartridge flow characteristics.
  • Recommended maximum operating temperature: 240 ºF (115 ºC).
  • Withstands excess of 75 psi (5.17 bar) differential pressure.
  • Choice of self-centering rod or screw base coalescer cartridge mounting styles.

pH range
From 5 to 9.

Materials
All metal components are treated against corrosion
Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
Buna-N gaskets-other materials are available upon request

Item Nominal Length Outside Diameter Inside Diameter Mounting Style
in mm in mm in mm
CM-11-5 11 ¼ 290 6 152 89 Rod
CM-14-5 14½ 370 6 152 89 Rod
CM-14SB-5 15 380 6 152 89 Screw Base
CM-22-5 22¼ 560 6 152 89 Rod
CM-22SB-5 23 580 6 152 89 Screw Base
CM-28-5 28¾ 730 6 152 89 Rod
CM-28-S8-5 29 740 6 152 89 Screw Base
CM-33-5 33¼ 840 6 152 89 Rod
CM-33SB-5 34 860 6 152 89 Screw Base
CM-38-5 38 960 6 152 89 Rod
CM-38SB-5 39 960 6 152 89 Screw Base
CM-43-5 43¼ 1100 6 152 89 Rod
CM-43SB-5 45 1140 6 152 89 Screw Base
CM-56-5 56¼ 1430 6 152 89 Rod
CM-56SB-5 57 1450 6 152 89 Screw Base

 

 

Related Products