Phone.: (03) 9311 7822 | sales@liquipvictoria.com.au

Categories

Vertical VCS (Category C or M) - Filter Water Separators

VCS Series

Vertical Coalescer Separators

6th Edition EI 1581, Category C, Type S Qualified

Category C Coalescer Separator housings are for commercial aviation fuel. Type S qualifications can be used at all filtration points in an aviation fueling system. Type S is meant to be used at filtration points where significant levels of water and dirt in the product can be expected. Facet VCS Series Vertical Coalescer Separator housings fully comply with EI 1581, Category C, Type S requirements.

Reliable Performance

Facet coalescer separators are a result of over 75 years of continuous research and development to meet the ever demanding performance requirements in the aviation fuel handling industry. This, along with proven field performance, demonstrates Facet’s ability to provide quality products that meet current specifications as well as specific customer requirements for installations in refineries, bulk storage terminals, heliports, airports, etc.

Vertical Coalescer Separators

6th Edition EI 1581, Category M, Type S Qualified

Category M Coalescer Separator housings are for Military F24, JP-8 or JP-5 fuel. Type S qualifications can be used at all filtration points in an aviation fueling system. Type S is meant to be used at filtration points where significant levels of water and dirt in the product can be expected. Facet VCS Series Vertical Coalescer Separator housings fully comply with EI 1581, Category M, Type S requirements.

Reliable Performance

Facet coalescer separators are a result of over 75 years of continuous research and development to meet the ever demanding performance requirements in the aviation fuel handling industry. This, along with proven field performance, demonstrates Facet’s ability to provide quality products that meet current specifications as well as specific customer requirements for installations in refineries, bulk storage terminals, heliports, airports, etc.

Features & Benefits
  • Designed to be used in:
    • Type S filtration points i.e. where significant levels of water and dirt in the product can be expected.
    • Type S-LW mobile applications i.e. where minimum amounts of water and dirt in the products are expected.
  • Can be supplied in vertical configurations.
  • Can be supplied for different categories e.g. C or M.
  • EI 1596 Design & Construction
  • Welded carbon steel construction—other materials available on request • ASME Code, Section VIII construction, stamped and certified

 

 

 

  • Welded carbon steel construction, other materials available on request
  • EI 1596 Design & Construction
  • Choice of rod or screw base coalescer cartridge mounting styles
  • Knife edge cartridge mounting seals
  • Design pressure: for 150 psi (10.5 kg/cm²) @ 250ºF (121ºC) -other design pressures available on request
  • Headlift furnished in 18” OD and larger
  • Inlet, outlet and drain connections permanently marked
  • Swing bolt head closures
  • Buna-N o-ring closure seal
  • Spider support plate
  • Sloping cartridge plate
  • Automatic air eliminator with check valve
Technical Information

VCS Series Category C (Commercial) Type S

  • EI 1596 Design & Construction
  • Welded carbon steel construction—other materials available on request
  •  ASME Code, Section VIII construction, stamped and certified
  • Design pressure: 150 psi @ 250 ˚F (10.3 bar @ 121 ºC) — other design pressures available on request
  • Inlet, outlet and drain connections permanently marked
  • Choice of rod or screw base coalescer cartridge mounting styles
  • Interior: Epoxy coated (EI 1541)
  • Exterior: Prime coated
  • Swing bolt head closures
  • Buna-N o-ring closure seal
  • Knife edge cartridge mounting seals
  • Headlift furnished on 18" (457 mm) OD and larger
  • Spider plate attached to vessel wall
  • Sloping cartridge plate to drain connection
  • 4" inlet/outlet cleanout/inspection connections (when permitted by design)
  • Connections provided for options listed below
    Options
  • Automatic air eliminator* with check valve
  • Pressure relief valve*
  • Differential pressure gauge*
  • Pilot control valve
  • Pilot tester
  • Water slug control valve
  • Electrical water-level alarm
  • Water drain valves
  • Liquid level gauge
  • Blind cover for pilot control mounting flange
  • Immersion heaters
  • Sampling probes*
  • Working platform and ladder
    (* Mandatory for EI 1596 2nd Edition)

VCS Series Category M (Military) Type S

  • EI 1596 Design & Construction
  • Welded carbon steel construction—other materials available on request
  • ASME Code, Section VIII construction, stamped and certified
  • Design pressure: 150 psi @ 250 ˚F (10.3 bar @ 121 ºC) — other design pressures available on request
  • Inlet, outlet and drain connections permanently marked
  • Choice of rod or screw base coalescer cartridge mounting styles
  • Interior: Epoxy coated (EI 1541)
  • Exterior: Prime coated
  • Swing bolt head closures
  • Buna-N o-ring closure seal
  • Knife edge cartridge mounting seals
  • Headlift furnished on 18" (457 mm) OD and larger
  • Spider plate attached to vessel wall
  • Sloping cartridge plate to drain connection
  • 4" inlet/outlet cleanout/inspection connections (when permitted by design)
  • Connections provided for options listed below
    Options
  • Automatic air eliminator* with check valve
  • Pressure relief valve*
  • Differential pressure gauge*
  • Pilot control valve
  • Pilot tester
  • Water slug control valve
  • Electrical water-level alarm
  • Water drain valves
  • Liquid level gauge
  • Blind cover for pilot control mounting flange
  • Immersion heaters
  • Sampling probes*
  • Working platform and ladder (* Mandatory for EI 1596 2nd Edition)

 

Ordering Informatiom

Contact Liquip for parts suitability and ordering. 

Resources
 

Related Products